How to Make Fudge: 3 Tips for Making Your Best Fudge (2024)

Listen to This Article:

Loading the Elevenlabs Text to Speech AudioNative Player…

What’s not to love about fudge? It melts in your mouth, coating your tongue in rich and creamy sweetness.

However, making meltaway fudge isn’t always easy! If you don’t understand the proper techniques, you may end up with a grainy or crumbly rather than creamy confection.

If you want to get a better hold on making fudge, join us as we dive into some of the culinary science that pastry arts students can explore during their time at Escoffier.

How to Make Fudge

The simplest fudge recipes start with three ingredients found in many types of confections: sugar, butter, and milk. However, some recipes contain variations on these ingredients, like swapping sweetened condensed milk for the milk and sugar, or semi-sweet chocolate chips for some of the sugar.

Many types of fudge also contain additional ingredients like chocolate, vanilla, or maple syrup, as well as mix-ins such as nuts and marshmallows.

No matter the exact ingredients you use, the fudge-making process will be similar. First, you’ll heat the ingredients to dissolve the sugar and create a homogenous mixture. Next, you’ll cook the mixture until it thickens. Finally, you’ll remove the fudge from the heat, allow it to cool, and then mix thoroughly.

Tips for Making Fudge

Smooth, creamy, and decadent fudge relies on proper technique, so keep these tips in mind when whipping up your next batch.

1. Monitor the Temperature with a Candy Thermometer

If you end up with soft fudge that turns into a puddle in your hands or hard fudge that is a bit reminiscent of a crunchy candy, improper temperature is likely to blame. If you don’t heat your fudge to a high enough temperature, you’ll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you’d like.

When you’re cooking your fudge over the stove, you should aim for a maximum temperature between 234-237ºF. Yes, that’s only a three-degree range! In order to ensure you remove your fudge from the heat as soon as it reaches this temperature, you should monitor the mixture with a candy thermometer.

2. Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it’s time to put the spoon down.

If you continue stirring once the mixture is simmering, you are encouraging the development of sugar crystals. While crystallization is the goal if you’re making hard candy, crunchy sugar bits can quickly ruin a fudge’s silky smooth texture.

3. Beat Thoroughly

While you shouldn’t mix the fudge mixture when it’s hot, you should beat the mixture once it has been removed from the heat and cooled.

Once again, turn to your candy thermometer. When the mixture has cooled to 110ºF (but not a moment before), it’s time to pick up a wooden spoon and begin stirring. Continue mixing the fudge until it has lost most of its sheen, about 5–10 minutes.

If you mix the fudge when it’s too hot, the sugar particles may lump together and form discernable crystals. Therefore, monitoring the temperature is key!

How to Make Fudge: 3 Tips for Making Your Best Fudge (1)

Proper technique is an essential part of creating silky smooth fudge.

Chocolate Fudge Recipe

Keep the previous fudge tips in mind as you follow this recipe for chocolate fudge.

Ingredients

  • 28 oz granulated sugar
  • 12 oz whole milk
  • 6 oz corn syrup
  • 4 oz butter
  • 5 oz unsweetened chocolate
  • ¼ tsp salt
  • 1 tbsp vanilla

Directions

  1. Prepare an 8×8 pan by lining it with butter-coated parchment paper or aluminum foil.
  2. Place the sugar, milk, and corn syrup in a medium saucepan and stir well. Once the mixture begins to boil, stop stirring. Monitor the mixture and watch for it to reach 230ºF.
  3. Add the butter, chocolate, salt, and vanilla and bring the temperature up to 235ºF. Remove from heat.
  4. Once the mixture has cooled to 110ºF, mix it with a wooden spoon until it loses the majority of its sheen.
  5. Pour the mixture into the prepared pan and let it cool fully before slicing.

Continue Improving Your Pastry Skills

Now that you know some of the tips for making fudge, it’s time to think about what other confections and baked goods you’d like to create! Whether you want to make a chewy yet tender loaf of bread or decorate a cake with smooth fondant and intricately piped roses, understanding the technique behind successful dishes is key.

Pastry school can introduce you to both the science and art involved in creating some of your favorite sweet treats and savory baked goods. By working with talented chef instructors, you can explore inside tricks and tips and receive individualized feedback as you practice creating new dishes.

By the time students graduate from , many find they are ready to move toward career goals like starting a bakery or beginning a career as a cake decorator. If you’d like to take the next step to accomplish your pastry dreams, contact us for more information.

To learn more about baking & pastry, check these out next:

  • Cake Decorating Tips: How to Choose the Right Pastry Bag
  • What Is It Like to Be a Pastry Chef?
  • 6 Advanced Baking Techniques Every Pastry Chef Should Know

This article was originally published on December 25, 2016, and has since been updated.

*Information may not reflect every student’s experience. Results and outcomes may be based on several factors such as geographical region or previous experience.

How to Make Fudge: 3 Tips for Making Your Best Fudge (2024)

FAQs

What is the secret to good fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

What not to do when making fudge? ›

7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels
  1. Using the Wrong Pan. All candy and confections start by melting sugar. ...
  2. Stirring the Sugar. ...
  3. Not Using a Candy Thermometer. ...
  4. Leaving Out the Parchment Paper Lining. ...
  5. Skipping the Cooking Spray. ...
  6. Scraping the Pot. ...
  7. Using a Cold Knife to Slice.
Dec 16, 2015

What is the secret to smooth fudge that is not gritty? ›

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

What ingredient makes fudge hard? ›

As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.

What happens if I use sweetened condensed milk instead of evaporated milk in fudge? ›

Don't Substitute One for the Other

Thus, using condensed milk in a recipe that requires evaporated milk will yield an overly sweet dish.

How long do you stir fudge while boiling? ›

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

How long does fudge have to sit before you can cut it? ›

Pour Fudge into Prepared Pan

Once the fudge has thickened and the nuts are added, pour the fudge into the prepared pan. Allow it to set at room temperature until firm, about three hours or overnight.

What makes fudge softer? ›

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

What does cream of tartar do to fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

What to do with failed fudge? ›

Options for what you can do with your unset fudge:

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.

Why do you stir fudge? ›

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

What is the soft ball test for fudge? ›

making of fudge

termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

How long do you boil fudge to get to soft ball stage? ›

How long does it take to make fudge:
  1. about 18 min to reach boiling.
  2. about 40 minutes to reach soft ball stage.
  3. 60 minutes to cool.
  4. 28 minutes to beat in a KitchenAid (your time for this may vary)
  5. 4 hours to set.

What thickens fudge? ›

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

What does cream of tartar do in fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

Why did my fudge not get hard? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Why is my 3 ingredient fudge not setting? ›

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.

How to make fudge more solid? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Horacio Brakus JD

Last Updated:

Views: 5312

Rating: 4 / 5 (51 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Horacio Brakus JD

Birthday: 1999-08-21

Address: Apt. 524 43384 Minnie Prairie, South Edda, MA 62804

Phone: +5931039998219

Job: Sales Strategist

Hobby: Sculling, Kitesurfing, Orienteering, Painting, Computer programming, Creative writing, Scuba diving

Introduction: My name is Horacio Brakus JD, I am a lively, splendid, jolly, vivacious, vast, cheerful, agreeable person who loves writing and wants to share my knowledge and understanding with you.